The washing machine used for washing power. The current requirement is needed for much of the warming of the water. To reduce the power requirements, the washing machine can be connected to an existing hot water supply. If the washer is supplied with hot water already, it needs the water no longer, or at least not as much to heat. The connection of the washing machine on a hot water supply can be worthwhile if the warm water can be produced cost effectively. It is conceivable a generation of warm water with a solar system. But even if the hot water is generated by a gas condensing boiler, may be worth the port. If the washer is connected to the warm water, then make sure that water should not be warmer than the washing machine at the selected temperature.
One way the washer to the warm water to connect the use of a thermostat valve. About the thermostat valve of the washing machine can then be fed into the warm water. This should, in addition to the cold water, a hot water near the washing machine must be available. It is important that the injected hot water from the beginning to the correct temperature. Therefore, if no circulation line is present in the immediate vicinity of the washing machine be possible to discharge only as much water until the water has reached the desired temperature really well. When washing you some things to consider.
Before each wash cycle is then set on the thermostat valve to the desired temperature. The set temperature on the thermostat valve must match the set of the washing machine. It should possibly as much water to be drained until the water reaches the set temperature. After a while the washing machine needed most, only cold water. This means that should be terminated after this time the temperature at the thermostatic valve to cold. For more information on saving the house and in the household can also be found on the website of pleasure in saving.