Munsterland Steinfurt

Thanks to new technology, entry in a heat recovery system in the printing house of Tecklenborg, a production facility in the Munsterland Steinfurt, aimed mainly at natural and economic titles sets with the help of the Quint sdi GmbH on heat recovery. Based, a compact cooler was installed on a conception of the Hessian specialist for energy saving and heat recovery systems in December 2010 in the printing type Nautilus RKS 60 for heat dissipation. The in-house development of the Quint sdi GmbH ensures that the heat accumulated in the water-cooled units targeted dissipated to the outside air and thus optimise the pressroom climate. The system, which can be installed subsequently, represents the precursor to comprehensive energy-saving by means of heat recovery. At this the collected heat is on the environment no longer issued, but specifically used in Home technology, E.g. for heating. For the installation of the Nautilus RKS 60 at the Tecklenborg Verlag was the commissioning of a new Heidelberg printing machine CD 102-5. Hubert Tecklenborg, founder and owner of the printing and publishing house with about 45 employees, is sure that his company with the fifth technology for the needs of the future is well equipped.

As a result, that the quality of the printed products always higher and the production times are getting shorter, can we afford absolutely no production fluctuations. Variations in the products, as they previously ever occurred due to the non-existent pressure room air conditioning, are image side, especially economically no longer to represent.” For the commissioning of the new heat dissipation but also the higher machine speed existing with the new machine and the higher electrical power associated said. Also, the regulated pressure room climate represents a good employee retention because working in the operation, especially in hot temperatures, will be much more pleasant. That the printing house of Tecklenborg the Quint sdi GmbH as a partner for the topic of heat recovery selected, was the quality and construction of the device, but also the reputation of the company.

Posted on

Managing Director

KeyTech Software GmbH receives certification for Auodesk inventor interface of the PLM (product lifecycle management) keytech Software GmbH, Recklinghausen manufacturer receives certification for its Auodesk inventor interface and deepen the cooperation with the California software company. On the Autodesk University 2010 in Las Vegas (United States) presented the keytech Software GmbH his recently certified interface for the CAD program Autodesk Inventor. The product lifecycle management system of the software manufacturer is one of the first authorized Autodesk partner solutions in the PLM environment. An essential part of a PLM system is the integration of different CAD solutions. KeyTech integrated in addition to the Autodesk AutoCAD and inventor products or other construction systems.

As an independent provider of PLM, a system for companies that have multiple CAD programs, even from different manufacturers, in use provides keytech. “The Autodesk community is one of our most important customer groups”, said “Dr. Reiner Heimsoth, Managing Director of keytech Software GmbH. als focussierter PLM specialist we are competent contact person for our clients in the Autodesk area and assist them in optimizing their product development.” With the advent of the new keytech version R12, the Autodesk was inventor interface newly developed and equipped with additional functions. The connection supports Autodesk Inventor in 2010 and 2011 (32-bit and 64-bit) versions. The new interface allows for loading of selected Assembly structures (for example, only shared items) and maximize component apprentice server with support of Autodesk “the memory speed. Also supports keytech reusable standard and custom iParts can be reconfigured with different specifications for different purposes.

The management of standard parts is ensured by the integration of the content Center. “” From the Autodesk Inventor modules frame generator “and piping” generated assemblies are represented by the semi-finished product management at keytech. The integration of iProperties to update the drawing frame and the optimization of the integration of parts lists are other components of the new Autodesk Inventor interface.

Posted on

Microcomputer Computer Skills

Communicate appropriately to manipulate a board computer or computer requires have been prepared previously in the handling of letters, numbers and symbols of those wonderful machines whose discovery and subsequent development came to become or the facilitator more important, of all known time, for communication between human beings, between human beings and machines, and even among their own machines. In addition to the knowledge of the machine itself and its potentialities, the speed with which we are able to operate them, is one of the factors that is negatively influencing various areas of your application, such as: companies (from the point of view of data transcription), universities (from the point of view of the presentation of student work including the thesis) and in some expressions of everyday life (from the point of view of the) communications via the Internet through email and Chat). The speed of transcription through the boards of the microcomputers or computers as often called in the Latin language, causes or could cause undesired performance levels, low performance in the professional activities of companies that must process large volumes of information with these communication and control devices, also in those small companies that depend on the computer even in small scale whose operators with poor typing skills, i.e. manipulate letters, numbers and symbols with just two fingers, and in some cases with only one causing enormous delays in the final production of documents that must be processed in various ways to complete the required communication process. We can see that communication between young and not young people via Chat or chat via the Internet produces a severe rejection among those who can generate a fluid at a reasonable speed communication and those who don’t, which are immediately relegated by not being able to write with sufficient speed especially when trying to start new friendships. All the professionals who must produce or process information via this medium should be alert that your performance is not diminished by the simple fact of having not enough developed their skills typing to address the challenge of producing or processing information in a timely, flawless own handling of the language in which they communicate.

Posted on

RSS Content

Often, different scripts can be customized so that the appearance of food can be matched to a specific websiteeeds hope that search engines will devour and spider the contents, you will be disappointed. When JavScript is used to display RSS feeds, search engines not actually "see" the content of the feed, which means that search engines will not index the content of the feed within the website. Feedroll – Feedroll is a free service for the distribution of RSS and ATOM news feeds on your website. Simply select a feed, customize the layout, then copy and paste the code into your page. Using PHP to display RSS PHP is a more complex solution for displaying RSS. Like JavScript, and content updates feed, web page content will be updated as the page is updated. The advantage to use PHP to display RSS is that the content of the feed displayed with the website can be indexed and indexed by search engines. The result is a food that always displays the latest information from the RSS feed and web page content is considered search engines and the robot to use.

rss2html.php – The rss2html.php script allows users to create web pages that are always display the latest information from the RSS feed, and because the resulting page's HTML is pure, it will be in a nice format for robots of search engines. Using rss2html.php, webmasters can customize the layout and appearance of the web page created from food. The RSS feed content can be easily integrated into the subject of an existing website.

Posted on

San Francisco

" I myself I devised the name. The letter " K" it had been always my favorite. It seems strong, incisive. It was question to make a great number of combinations of letters to form words that began or finished with " K". And the result was " KODAK". I bequeath: The roots of I bequeath are in Denmark, where Ole Kirk Christiansen began in 1932 to construct wood articles.

Between products scissors stairs were included, tables to iron and toys. Ole observed good perspective for these last ones. It was concentrated in it and it gave the name him his work: I bequeath, a combination of the Danish words: " Leg godt" , that means " to play bien". Levi" s: The first Levi" s was clothes of the miners of San Francisco, towards 1850. One was petos of loneta brown that the Bavarian emigrant Levi Strauss had made to them. Linux: This computer science operating system is called thus by its first developer, Linus Torvald, with a change of " s" by " x" in honor to Unix, the operating system (leader in the world of the great servants) from which comes.

Lois: The Spanish manufacturers of this cattle clothes tried to give a French touch to the denomination of their mark. They thought that " Lois" &quot was the translation of the masculine name; Luis" , to this language. When in fact he is " Louis". Lucky Strike: Its creator, doctor R.A. Patterson, associated its tobacco with the Californian gold prospectors. From the name of &quot arose there; Lucky Strike" or " blow of suerte". Mafalda: Cinchona created this comic strip like advertising support for a company of electric home appliances. The name of Mafalda tried to remember the name of the mark. Handle: Isak Andic, proprietor of this fashionable company/signature, had all preparation for its launching: the store of Stroll of Grace on the verge of abrir, the merchandise, the personnel, the authorizations, It only needed the name.

Posted on